Features:
1. Easy to install:
The cable branch can be made without stripping the cable insulation layer or cutting off the main cable, and the joints are completely waterproof and sealed and insulated.
It can work with electricity and branch at any position of the cable. Only a socket wrench is required for installation.
2. Self-sealing structure, moisture-proof, waterproof and anti-corrosion, prolong the service life of insulated wires and clamps
3. Using special contact blade, suitable for copper (aluminum) butt joint and copper-aluminum transition
4. The electrical contact resistance is small, the contact resistance is less than the equal-length branch, and the wire resistance is 1.1 times, in line with the DL/T765.1-2001 standard
5. Special insulating shell, anti-light and environmental aging, dielectric strength>12KV
6. Curved surface design, suitable for the same (different) diameter wire connection, wide connection range (0.7-400 square)
型号 Type |
等同型号 Equivalentype |
应用电压 Applied Voltage |
适用导线 Applicable Conductor Range | 螺栓数 Bolt Number |
|
主线截面 Main Line Section (mm°) |
分支截面 Branch Line Section (mm) |
||||
LP120F | 1kV | 16-120 | 接地 | 1 | |
LP150F | 50-150 | 1 | |||
LP6F | 120-240 | 1 | |||
LP240F | 50-240 | 2 | |||
LPF10-240/150 | JJCF10-1 | 10kV | 150-240 | 2 | |
LPF10-185/70 | JJCF10-2 | 70-185 | 2 | ||
LPF10-95/25 | JJCF10-3 | 25-95 | 2 |